LMC Series
Semi automatic L sealer packaging machine
Technical Specifications:
Sealer Bar Opening:
Maximum Capacity:
Maximum Product Height:
Maximum Roll Diameter:
Working Height:
Compr. Air Suplly:
Film Types:
Color:
Maximum Capacity:
Maximum Product Height:
Maximum Roll Diameter:
Working Height:
Compr. Air Suplly:
Film Types:
Color:
250mm
10 - 15 pack/min. *
245mm
250mm
860mm
No
POF: 7-37 mic. PVC: 15-25 mic.
Mixed grey + RAL7010 + RAL7015
10 - 15 pack/min. *
245mm
250mm
860mm
No
POF: 7-37 mic. PVC: 15-25 mic.
Mixed grey + RAL7010 + RAL7015
Dane
Working Principle:
L - Selaer Sizes:
Maximum Film Width:
Installed Power:
Average Consumption:
Dimensions ( AxBxC):
Pallletized Size (AxBxC):
Weight (Net / Gross):
LMC 58x44-H
Close with hand
580 x 440mm
550mm
400V 5A 3 phase
2 kW / 1,4 kW
760x1500x1200mm
950x1700x1250mm
144 kg / 161 kg
LMC 80x65-H
Close with hand
800 x 650mm
680mm
400V 6A 3 phase
2,4 kW / 1,8 kW
1100x2050x1200mm
1300x2250x1250mm
196 kg / 219 kg
LMC58x44-M
Motorized
580 x 440mm
550mm
400V 5A 3 phase
2 kW / 1,4 kW
760x1500x1200mm
950x1700x1250mm
148 kg / 166 kg
LMC 80x65-M
Motorlu
800 x 650mm
680mm
400V 6A 3 faz
2,4 kW / 1,8 kW
1100x2050x1200mm
1300x2250x1250mm
201 kg / 226 kg
LMC 95x65-M
Motorized
950 x 650mm
680mm
400V 6A 3 phase
2,6 kW / 2 kW
1100x2260x1200mm
1300x2600x1250mm
217 kg / 243 kg
Advantages:
- Practical semi-automatic solution for low and medium capacity requirements
- Easy to use, compatible with health and safety standards
- Ability to provide heat to wire at exact efficient dose, realized by I-Sealing System®
- Ability to keep wire temperature constant, realized by I-Sealing System®
- Increase in sealing quality, process accuracy and life-span by stabilized heat control
Features:
- M Series: Sealing L-Bar is driven by a motor (no need for compressed air)
- M Series: In automatic mode, sealing bar cycles automatically in predefined period
- M Series: In free mode, sealing bar is triggered by button
- M Series: Sensor detects any obstacle and stops the cycle automatically for safety
- H Series: Sealing L-Bar is closed by hand, weight is balanced with reverse load
- H Series: Magnetic holder keeps L-Bar closed for pre-defined time period
- Easy to integrate with all types of heat tunnel directly
- Products are discharged by internal belt conveyor automatically
- Operated by digital control panel
- Position of the working table can be adjusted with respect to product width
- Single-axis film roll holding profile can be easily removed, replaced and fixed
- Easily transportable on wheels inside a facility
Sealing:
- M Series: Sealing is actuated by motor in between wire and silicon rubber
- H Series: Sealing is actuated manually in between wire and silicon rubber
- Sealing wire is positioned on fixed bottom frame for safety
- Sealing wire is embedded into heat-resistant fiber profile
- Teflon belt covered silicon rubber increase sealing quality and life-span of silicon
Flexibility:
- Discharge belt height can be adjusted with respect to varying product height
- Discharge belt working time can be adjusted with respect to varying product length
- Power of sealing wire can be adjusted with respect to varying film thicknesses
- Heat, time and speed parameters can be easily adjusted via digital control panel
- Various language options are available in digital control panel
- Detailed technical menu is available in digital control panel
- Practical semi-automatic solution for low and medium capacity requirements
- Easy to use, compatible with health and safety standards
- Ability to provide heat to wire at exact efficient dose, realized by I-Sealing System®
- Ability to keep wire temperature constant, realized by I-Sealing System®
- Increase in sealing quality, process accuracy and life-span by stabilized heat control
Features:
- M Series: Sealing L-Bar is driven by a motor (no need for compressed air)
- M Series: In automatic mode, sealing bar cycles automatically in predefined period
- M Series: In free mode, sealing bar is triggered by button
- M Series: Sensor detects any obstacle and stops the cycle automatically for safety
- H Series: Sealing L-Bar is closed by hand, weight is balanced with reverse load
- H Series: Magnetic holder keeps L-Bar closed for pre-defined time period
- Easy to integrate with all types of heat tunnel directly
- Products are discharged by internal belt conveyor automatically
- Operated by digital control panel
- Position of the working table can be adjusted with respect to product width
- Single-axis film roll holding profile can be easily removed, replaced and fixed
- Easily transportable on wheels inside a facility
Sealing:
- M Series: Sealing is actuated by motor in between wire and silicon rubber
- H Series: Sealing is actuated manually in between wire and silicon rubber
- Sealing wire is positioned on fixed bottom frame for safety
- Sealing wire is embedded into heat-resistant fiber profile
- Teflon belt covered silicon rubber increase sealing quality and life-span of silicon
Flexibility:
- Discharge belt height can be adjusted with respect to varying product height
- Discharge belt working time can be adjusted with respect to varying product length
- Power of sealing wire can be adjusted with respect to varying film thicknesses
- Heat, time and speed parameters can be easily adjusted via digital control panel
- Various language options are available in digital control panel
- Detailed technical menu is available in digital control panel
Optional:
- Automatic trim winder option is available upon request
- Stainless steel versions are available for wet/moist working environment
- Heat treated strong wooden case is available for risky transport conditions
- On-site installation and training service options are available
Quality:
- ISO9001 quality standards with the relevant norm’s confirmation
- CE certifications, complies with the latest CE directives
- World-wide approved brands for all mechanical and electrical components
- 1 year warranty against manufacturing faults
- Wearable parts are not included in warranty terms
- 1 set of wear parts is provided along with the machine
- 5 years spare part stock availability is provided
- Installation, testing and training services are provided free of charge
- Automatic trim winder option is available upon request
- Stainless steel versions are available for wet/moist working environment
- Heat treated strong wooden case is available for risky transport conditions
- On-site installation and training service options are available
Quality:
- ISO9001 quality standards with the relevant norm’s confirmation
- CE certifications, complies with the latest CE directives
- World-wide approved brands for all mechanical and electrical components
- 1 year warranty against manufacturing faults
- Wearable parts are not included in warranty terms
- 1 set of wear parts is provided along with the machine
- 5 years spare part stock availability is provided
- Installation, testing and training services are provided free of charge